We – EPG Group the largest agricultural gearbox and pto factory in China with 5 different branches. For a lot more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
Semi-forever mounted electrical power just take-offs can also be found on industrial and maritime engines. These programs normally use a push shaft and bolted joint to transmit energy to a secondary put into action or accessory. In the situation of a marine application, such shafts might be utilised to electricity hearth pumps. Close up of two yokes with the universal joint. Note the slight oozing of grease from the UJ seal finishes, the clump of grease is from within the yoke splined shaft location –Travel (outer) yoke has a female (normal spline) hole and “Y” condition stop that is the universal joint (UJ) mount. –UJ is a cross formed casting obtaining roller bearings enclosed with caps at all four points and is held into the yoke with four “C” clips –Internal yoke and drive shaft is another yoke welded to the travel end, of the generate shaft. –Pushed shaft and interior yoke is the driven shaft that rides within of the drive shaft and has a yoke welded at the pushed conclude –UJ one more UJ as above2004 dodge ram 1500 front push shaft EPG tukar generate shaft Machinery ford 4000 pto shaft install is short pto shaft positioned 2003 cadillac cts generate shaft in xj front driveshaft XiHu consistent velocity pto shaft Area mark williams driveshaft HangZhou 05 jeep grand cherokee entrance travel shaft Zhejiang tractor pto shaft coupling ,China. It is 30km from our factory to HangZhou global airport.
SWP F Type Cardan Shaft(JB/T3241-1991)
Cardan shaft is widely used in rolling mill, punch, straightener, crusher, ship generate,paper producing equipment, widespread equipment, drinking water pump equipment,check bench and other mechanical purposes.
·Mark instance:
Tactical diameter D=200mm,Installation length L=1150mm,F variety cardan shaft
SWP200F×1150 Coupling JB/T3241-91
·SWP F Type Cardan Shaft Simple Parameter And Main Dimension(JB/T3241-1991)
| Sort | Tactical diameter D mm |
Nominal torque Tn kN·m |
Fatique torque Tf kN·m |
Axis angle β (°) |
Stretch size S mm |
Measurement(mm) | Rotary inertia kg·m2 |
Mass kg |
|||||||||||
| Lmin | D1 js11 |
D2 H7 |
D3 | E | E1 | B×h | h1 | L1 | n-d | Lmin | Increase a hundred |
Lmin | Increase one hundred |
||||||
| SWP160F | 160 | sixteen | eight | ≤10 | a hundred and fifty | 770 | 140 | 95 | 114 | fifteen | 4 | 20×12 | six | 85 | 6-thirteen | .fourteen | .0059 | 51 | 2.one |
| SWP180F | one hundred eighty | 20 | 10 | ≤10 | one hundred seventy | 830 | a hundred and fifty five | 105 | 121 | 15 | four | 24×14 | 7 | ninety five | six-15 | .23 | .0072 | 64 | two.3 |
| SWP200F | two hundred | 31.five | 16 | ≤10 | a hundred ninety | 950 | a hundred seventy five | 125 | seventeen | 17 | five | 28×16 | eight | 110 | 8-15 | .40 | .0114 | 88 | 3.four |
| SWP225F | 225 | forty | twenty | ≤10 | 210 | 1070 | 196 | one hundred thirty five | 152 | twenty | 5 | 32×18 | nine | 130 | 8-seventeen | .66 | .0290 | a hundred and twenty | 6.6 |
| SWP250F | 250 | sixty three | 31.5 | ≤10 | 220 | 1110 | 218 | one hundred fifty | 168 | twenty five | five | 40×25 | 12.five | one hundred thirty five | eight-19 | 1.06 | .0407 | 158 | 7.3 |
| SWP285F | 285 | 90 | forty five | ≤10 | 240 | 1270 | 245 | 170 | 194 | 27 | seven | 40×30 | fifteen | one hundred fifty | 8-21 | 2.24 | .0702 | 255 | 9.4 |
| SWP315F | 315 | 140 | 63 | ≤10 | 270 | 1410 | 280 | 185 | 219 | 32 | 7 | 40×30 | 15 | a hundred and seventy | 10-23 | three.99 | .1144 | 344 | twelve. |
| SWP350F | 350 | 180 | 90 | ≤10 | 290 | 1540 | 310 | 210 | 245 | 35 | 8 | 50×32 | 16 | 185 | ten-23 | six.90 | .1663 | 460 | thirteen.six |
| SWP390F | 390 | 250 | 112 | ≤10 | 315 | 1680 | 345 | 235 | 273 | forty | 8 | 70×36 | eighteen | 205 | ten-twenty five | 11.ninety | .2695 | 600 | eighteen. |
| SWP435F | 435 | 355 | a hundred and sixty | ≤10 | 335 | 1880 | 385 | 255 | 299 | forty two | 10 | 80×40 | 20 | 235 | sixteen-28 | 22.41 | .3645 | 985 | 20. |
| SWP480F | 480 | 450 | 224 | ≤10 | 350 | 2080 | 425 | 275 | 351 | 47 | 12 | 90×45 | 22.five | 265 | 16-31 | 39.09 | .7028 | 1365 | 28. |
| SWP550F | 550 | 710 | 315 | ≤10 | 360 | 2230 | 492 | 320 | 402 | fifty | 12 | 100×45 | 22.five | 290 | sixteen-31 | 62.12 | 1.1842 | 1785 | 35.seven |
| SWP600F | 600 | one thousand | five hundred | ≤10 | 370 | 2800 | 544 | 380 | 450 | fifty five | 15 | 90×55 | 27.5 | 360 | 22-34 | 100.forty eight | 1.7159 | 2403 | forty.5 |
| SWP640F | 640 | 1250 | 630 | ≤10 | 380 | 2920 | 575 | 385 | 480 | 60 | fifteen | 100×60 | 30 | 385 | 18-38 | 168.28 | 2.3080 | 3207 | forty eight.3 |
·Notice:L is the duration of set up,like the worth of S/Z shrinkage.
♦Product Demonstrate
♦Other Products Listing
| Transmission Machinery Areas Identify |
Model |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Firm
Our organization materials distinct kinds of products. High good quality and realistic value. We stick to the theory of “high quality first, services initial, steady enhancement and innovation to meet the customers” for the management and “zero defect, zero problems” as the good quality objective. To ideal our provider, we offer the items with very good good quality at the affordable value.
Welcome to personalize merchandise from our manufacturing unit and you should offer your layout drawings or contact us if you require other specifications.
♦Our Providers
one.Design and style Providers
Our design team has encounter in cardan shaft relating to item design and style and growth. If you have any demands for your new solution or wish to make further advancements, we are here to offer our assist.
2.Solution Services
raw supplies → Cutting → Forging →Rough machining →Shot blasting →Heat remedy →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
three.Samples Method
We could produce the sample in accordance to your requirement and amend the sample continuously to fulfill your need.
4.Research & Development
We normally research the new requirements of the marketplace and build the new model when there is new cars in the market.
5.Good quality Management
Every action need to be special check by Expert Personnel in accordance to the normal of ISO9001 and TS16949.
♦FAQ
Q 1: Are you investing firm or producer?
A: We are a professional manufacturer specializing in production
numerous sequence of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with personalized artworks of PDF or AI format.
Q 3:How lengthy is your delivery time?
Typically it is twenty-thirty times if the merchandise are not in inventory. It is according to amount.
Q 4: Do you supply samples ? Is it totally free or additional ?
Sure, we could provide the sample but not for free.Truly we have a very excellent cost basic principle, when you make the bulk purchase then value of sample will be deducted.
Q 5: How lengthy is your guarantee?
A: Our Warranty is 12 month underneath standard circumstance.
Q six: What is the MOQ?
A:Typically our MOQ is 1pcs.
Q 7: Do you have inspection methods for coupling ?
A:one hundred% self-inspection just before packing.
Q 8: Can I have a visit to your manufacturing unit prior to the get?
A: Positive,welcome to go to our manufacturing facility.
Q nine: What is your payment?
A:1) T/T. 2) L/C
♦Make contact with Us
Net:
Include: No.1 Fuyang Street,Chengnan park,Jingjiang Metropolis,Jiangsu Province,China
The use of original gear manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our business and the shown replacement areas contained herein are not sponsored, accepted, or produced by the OEM.
